Leatherman Surge (redesigned Version) Eyeglass Screwdriver

The objective of this instructable is to use efficiently the eyeglass screwdriver on the new redesigned Leatherman Surge, who lacks the capability to hold this small screwdriver.

You will need to sacrify one of your "bit kit":

1- With a Dremel, cut the both ends of the bit driver, leave around 8mm of the central portion (keep it centered).

2- The most difficult part: cut a groove just the thickness of the eyeglass screwdriver (the finest side), just deep enough for the screwdriver to fit totally inside the groove.

3- Add some superglue, welding, epoxy ... whatever you want, it doesn't really matter.

You can use your new homemade bit both in the Surge and the bit extender !