Led Gift Box
This is my first instructable
I´ll be glad if it works for anything you can give like a present or use ir like a mail box
I´ll be glad if it works for anything you can give like a present or use ir like a mail box
Material
-Snicker´s box
-LED
-Any resistor/resistance
-Wire
-Knife or hobby blade
-Gorilla Glue (any glue will be ok)
-Ruler
-White Marker
-Battery
-1 sheet of transparent plastic or plexi glass
-Duct tape
-Stapler
The Box
First draw a rectangule on the box with the white marker, then cut it with the knife
The "Glass"
Cut a few inches bigger rectangule so you can paste it in an easy way
Put some Gorilla Glue over the edges inside the box and put the plastic rectangule in, then i used some weights to keep in place the plastic
Put some Gorilla Glue over the edges inside the box and put the plastic rectangule in, then i used some weights to keep in place the plastic
The LED
Attach to the led one resistor i´ve used one of 100 oms
Cut a semi circle on the top of the box to put inside of it the led
Paste the led with the duct tape inside the box t the top of the box
Attach an DC eliminator to the LED and attach the wire with duct tape behind the box
Cut a semi circle on the top of the box to put inside of it the led
Paste the led with the duct tape inside the box t the top of the box
Attach an DC eliminator to the LED and attach the wire with duct tape behind the box
Testing, Finishing (:
Plug your new box to the power outlet and see if it works properly
If it works decore it and put any thing inside, enjoy (: