Lego Car Plane

Here is a list of step by step instructions on how to build your very own Lego car plane.

Start by setting the large flat gray piece down. Then place the 2  red 1X3 blocks at one end overhanging by one space. Butt the 2 white 2X6 blocks up to those. Butt the 2 yellow 2X4 blocks up to the white blocks. Now place the wheels underneath right next to the large gray piece.

Place the flat 2X2 black piece in center of yellow blocks as shown in picture. Then butt the flat yellow 2X4 plate up to the black one.

Place both of the red 2X10 plates on the white bricks right next to the yellow plate.

Place both white 1X8 blocks in between the red blocks. Then place yellow 2X6 block on top up against the red wings as seen in the picture.

Place white 2X8 block on top up against the yellow block. Then 3 steps back, place the blue 2X8 block on top. On top of that, put blue 2X4 block 3 steps back. Finally put the white 1X2 block on top at the end.

Place the sloped clear blocks on top as seen in the picture. Now you're finished!