Lego Excavator for the Kids

Here's my little Lego excavator I built the other day so the kids could build more of their Lego City.  

It uses mainly parts of the "My First Lego Set" number 10657 and some other bits.  See the next step for all the bits laid out

I love reliving my childhood Lego times with my kids! 

See the picture for all the parts required for this little digger

Start with the base and add the wheels to it.

Place the two red 2 by 2 blocks in the middle of the base

On the centre of these blocks add the turn table tile and place the rear lights, grill and safety bar as shown

Flip it around and add the front lights, safety bar and slope bit and surround the turn table tile with safety bars and grills as shown

Finish the base off by placing the black 4 by 6 plate centrally on the turn table tile and mount the half round 1 x 4 yellow brick on the back.

Attach the black 6 x 1 swivel part to the 2 x 2 plate.

To this add two 2 x 2 swivel blocks

And finally click on the bucket.

Place the arm on the base as shown

Add a control panel, levers, and the two 1 x 2 yellow bricks and the L plate as shown

Place the other two 1 x 2 yellow bricks and L Plate on the other side as shown

Add the wind shield and rear glass

Place the black 1 x 4 plate on top of the wind shield and the 1 x 4 black side mount block on the rear glass.

Add the "Safety Lights" and sloped plate as shown

Add the roll bars, place your "minifig", start her up and start digging!