Lego Portal Sentry Turret

I recently got into portal (I know, I'm a bit late to the game here) and I also love legos, so why not give it a try?

Please note this is my first instructable ever, so do not judge too harshly.

Also, check out my facebook page, Epically Simple Brick Builds, where I cover my GLaDOS Boss Battle room MOC in its entirety.

4 1x4 white plates

3 1x2 white plates

1 1x2 white jumper plate

1 1x3 black plate

3 1x1 grey/black tiles/plates

1 1x2 black jumper plate

1 1x1 black stud

1 1x1 red stud

1 2x2 black inverse curve plate

Start with the 4 main 1x4s.

Add the 3 1x2s to 3 of the 1x4s.

Add the white jumper plate over the middel of the 4th 1x4. It being in the middle is important.

Add the red stud to the middle of the white jumper.

stick the 1x1 plates in between the studs of the eye plate.

Do the same with the back plate.

Follow suit with the other panels.

Add the black jumper plate to the bottom-front of the body.

add the inverse curve on to the jumper as shown.

Add the black stud to the bottom-back of the body, opposite the black jumper plate.

Add the black 1x3 with the black stud in the middle of it.

For the active turret, replace the middle tile/plate with a grey/black 1x2 plate/tile.