Lego Wireless Mouse Receiver

You will need the following items and tools to make the Lego wireless mouse receiver

- 1 x 2 Lego piece (or any piece could work
- Broken mouse receiver
- Dremel tool
- Super Glue
- Pliers (optional)

I used a 1 x 2 Lego piece because it worked best but you could use any pice you have

Measure the Receiver next to the Lego and make the marks then cut on the inside of the lines. I use a sanding attachment to take off some of the burs.

Super Glue the receiver into the Lego. I'd use a pliers to hold the receiver to the Lego and add pressure.

You can leave it as is, or connect it to other Legos!

Thanks for looking at this project. This is my first one and I think I will be doing more!

Thanks