Let's Make an IPhone Dock

I thought I coud try, I have no idea if this is going to work, the only thing I'm doing is trying out the ideas in logic.

So, let's give it a go, eh?

1. An iphone stereo cord

2. A speaker- not in a frame

3. A box

4. A cup or something to put the speaker in

5. A subwoofer- not in a frame

6. A little stereo thingy for connecting surround audio together and listening to radio

7. An iphone or ipod

8. A hole

9. Some sticky tape

1. Make a hole in the bottom of the front pane of the box large enough for a subwoofer.

2. Tape the subwoofer into the hole.

3. Make another hole, in the top of the front pane, for the speaker.

4. Tape the speaker into the hole.

5. Make a slot in the back or front or side of the box for the stereo.

6. Take some wood and prop up the stereo connector, front facing out.

6. Open the box. Connect the speaker and sub appropriately into the stereo.

7. Connect the input to the iphone stereo cord. Make a little hole in the top of the box for that.

8. Put the stereo cord in the hole. Tape it where you want it.

9. Make a hole for the plug of the stereo. Pull the plug through. Set your stereo to "Off" and to whatever input you plugged your iphone cord into.

10. Plug in the dock. Plug in the iphone or ipod.

Turn the dock to "On".

Select a song.

And hope that all goes well!

The End

P.S. you can plug whatever you want into there, and listen to radio if your stereo does that.