Light Up Christmas Tree Annoying Gift Box

We designed an annoying gift box that is attractive enough to use as Christmas decorations after you give it. We even have a version that you can make the bulbs light up with led fairy lights. You can download all the files on Thangs at https://than.gs/m/1221733

You will need a 3d printer to print the following files.

(1) Tree Main

(1) Inside Cone

(1) Bottom

(4) Inside Pin

(31) Bulbs Solid (31 needed but we recommend printing several extra)

(1) Star Topper or Angel Topper

Put the gift on the bottom plate and install the 4 pins that holds the cone to the bottom plate.

Place the tee over the cone with the alignment marks lined up.

Now you can begin the fun of screwing the light bulbs in. Please lightly start the bulbs one by one. You will want to have all of the bulbs in before tightening all the way. Please do not over tighten the bulbs due to the fact that they are plastic.

The last part is to add the Angel or Star topper to the Tree Gift Box then check to make sure the bulbs are tight.