Linkit ONE Basics: Countdown
Countdown
Materials
Linkit ONE
7-segment LED
330ohm Resistors x7
Wire
NPL Transistor
Breadboard
Step 1 : Let's Begin
Start by placing the resistors . For this project you will need 7 resistors. Place them according to the example of mine.
Step 2
Now place the 7-segment LED. Follow the picture above. After that begin to add the wire to the bread board. There are two wires that start and end on the breadboard . Start with those wires and move on
Step 3: Linkit ONE
Take 4 more wires and place them like in the picture. It helps if they are all the same color.In between those wires place 3 more so that it looks like this.The Last wire goes at the bottom of the board and it is by itselg
Step 4
Now connect the breadboard and the Linkit ONE.
Step 5 :coding
This is what the final product looks likes. Now you should download This and upload it to the Linkit ONE via USB cable
Finish
The finish product will count down one second at a time. Any questions? Leave a comment. Thanks