Long Burning Fire Starter

by 92douglas in Outside > Fire

2879 Views, 33 Favorites, 0 Comments

Long Burning Fire Starter

20170521_142258.jpg

In this Instructable I will show you how to create fire starter that can burn for minutes long. These are small and would be idea to bring camping or keep in your car in case of emergency. As another plus they are very water resistant.

Supplies

Supplies:

Bowl

Plastic bags

Candle wax

Cotton balls

Microwave

Reduce the Wax Size

20170519_175740.jpg

My chunks of wax were rather large so for easier melting I crushed them up. Simply do this by putting them in a plastic bag and hitting it with a hammer. Do this until the desired size is reached. (Note: You may want to double up bags the may break. Try to get out all air possible to keep the bag from popping.)

Melting

20170521_113049.jpg
20170521_114122.jpg

Put your chunks of wax into a bowl you don't care about and cover it with a paper towel. Put it into the microwave and start it mine took about 8 minutes for a bit more than a cup. Yours will vary depending on type and amount of wax. Keep microwaving until the wax becomes completely melted. (Note: You can use any method to melt your wax such as stove or oven.

Flatten Cotton Balls

20170521_113416.jpg

Simply stretch out and flatten your cotton balls until they look like so.

Soaking Cotton Balls

20170521_115909.jpg

Gently soak the sides of the cotton balls but don't saturate the balls. Then set them on wax paper to dry.

Use

20170521_142258.jpg
20170521_141607.jpg
20170521_141658.jpg
20170521_141559.jpg

Crack open the outer wax casing and fluff out some cotton to light. They started very easily with flint and steel. It burned for about 11 and a half minutes.