Luxurious Outdoor Shower - Part 3 [Wall Details & Post Caps]

This is the 3rd part of the Luxurious Outdoor Shower and in this instructable you'll see: How I added some "Details on the Wall" & How I made my own "Post Caps".

Firstly, cut, sand and paint all the pieces you are going to need...

...then place the pcs one by one.

The width of the upper lath must be equal to the width of the post, in this case 4.5cm.

...and the dimensions of the under lath to be approximately 2.5 by 1cm.

Now, for the post caps you have to cut 4 pieces in different dimensions...

...and place them together, starting from the biggest to the smallest.

In this case I have 5 posts 4.5 by 4.5cm...

...so I need 5 pieces of every dimension.

5 pieces: 8.5cm x 8.5cm

5 pieces: 6.5cm x 6.5cm

5 pieces: 4.5cm x 4.5cm

5 pieces: 2.5cm x 2.5cm

Sand all the pcs one by one...

Now it’s time for the assembling.

Thanks for reading & I hope you liked it!

Subscribe, to help me make more!

https://www.youtube.com/subscription_center?add_us...