M90A Shotgun

This is the M90A shotgun from Halo 3. Have so much fun with my shotgun.

--Sorry everybody i have been saying that i would post all this stuff and i never did. i have recently gotten a new media station on my computer so i can post instructables now.-- Hope you enjoy my shotgun. Thanks N-Striker

Pros. :)
-powerful
-comfortable
-uses 2 different barrel designs
-uses rare sear trigger
-uses 2 different body structure types
-break action
-can shoot a wide range of ammo
-sturdy

Cons. :(
-alot of peices used
-can malfunction when loading (rare)
-hard to cock back



P.S. Happy New Year!

Alright here is the parts list:

Connectors:
-yellow= 107
-white "snoflake"= 15
-blue= 12
-red= 20
-green= 5
-orange= 62
-special rollercoaster green 3 slot= 4
-dark gray= 6

Rods=
-blue= 47
-white= 58
-red= 8
-small green= 152
-gray (sharpened)= 1
-yellow= 2

Extra=
-3 rod panel= 4
-blue spacers= 38
-elbow connectors= 2
-Y clips= 17
-blue clips= 2
-tan clips= 1
-ball connector (ball + socket) = 1

This is the part where you hold the gun.

This is the sear trigger system. Instead of your ususal block triggers and true triggers, this is a change. (Nothing against them, of course :))

This is the part underneath the barrel.

Not all the pics could fit in one step.

This most likely the hardest/most complicated part. There is alot of connecting to do. But, it's really sturdy and comfortable, at the same time!

The barrel and the last pic from the stock. This might be the easiest step. (PHEW!).

barrel cont.

This is where everything fits into place.

This is where you put the rubber bands.

Okay this step will tell you how to load the gun.


Ammo:
from a bb

to a grey rod!

In the video i sot three green rods.

Thanks alot everybody and i hope you enjoy my gun!