MCPE Cars: Pickup Truck

Ok so first of this isn't a sub special. But, thanks so much for the subs anyways. But I'm willing to bet most of you didn't come here to hear me thank you. You came here because you want to make the kickbutt pickup truck in the picture! So on with the Instructable. Enjoy!

Make a 10 X 4 area of elevated stone slabs.

Add stone brick blocks like in the picture, however note that the side with 3 blocks will be the front.

Add stairs towards the front side, facing outwards. Make sure the one closest to the front has one side facing towers the front.

Add stairs facing inward everywhere else along the walls.

Add blocks between the stairs on the front side.

Add slabs in between all the other stairs.

You should now have a small light gray area. Add stairs facing towards the back, on the front.

Now add stairs diagonally to the other ones facing inside.

Destroy the slabs and stairs right behind the sitting area.

Now remember that gap we made last step? If you don't, contact a doctor, you've got short term memory loss. Otherwise continue. Place stairs facing the back of the truck, in the gap.

In the sitting area there should only be one full block directly next to it. Place another block on top of that.

Add glass around in a c position like in the picture.

Add light gray carpet on the blocks and glass like in the picture.

Ever see somebody with glass organs? I hope not. Put glass blocks on the inside so that you can put the carpet on top.

Put the carpet on top.

Add signs on the front and back like the picture.

Add iron bars to form a bumper.

Finally, add wheels in the position in the picture. Congrats, you're done with the pickup truck! Go drive around, but be safe and don't get drunk!