Macbook Dock/stand (knex)
This is a simple macbook stand or dock made from K'nex.
Make the Big Part
This is only the 2d part, with the exception of one piece. If you don't have panels, replace the 3-holed triangular panels with just a yellow/grey rod and the 35 hole ones with grey rods.
The black rod that should be as long as the blue ones (between the middle two 3-holed panels) is actually a tiny triangular panel, pointing down.
The black rod that should be as long as the blue ones (between the middle two 3-holed panels) is actually a tiny triangular panel, pointing down.
Add the Side and Middle "legs"
they aren't really legs. If you dont have they tiny triangular piece, substitute with a 5-point yellow/vomit gold/grey with 3 green/black tiny rods. The first pic is for the middle and the last is for th two sides.
Back End
Simple and easy
You Are Done!
:3
(sorry for shaky pic)
The stand has held up for at least 12 weeks, and I feel it makes it more fun to type.
(sorry for shaky pic)
The stand has held up for at least 12 weeks, and I feel it makes it more fun to type.