Magic Boat

Materials Required: 1 Origami Paper

Fold the paper in half (along the dotted line) and then unfold it.

Fold the upper and lower halves into halves to form a rectangle and then unfold it.

Rotate 90 Degrees clockwise.

Fold the paper in half and then unfold it.

Fold the upper and lower halves(along the dotted lines) into halves to form a rectangle and then unfold it.

There should be creases that form 16 squares.

Fold the paper diagonally and unfold it.

Fold the paper along the other diagonal.

Unfold it and keep the coloured part topside(Facing you) and rotate so that it is in diamond shape.(♦)

Fold all the corners inside till the tip of the corner reaches the center. You should get a square.

Unfold and Flip the paper upside-down so that the non-coloured part is topside(Facing Up).

Fold the upper and lower halves(along the dotted line) into halves to form a rectangle.

Rotate the paper 90 Degrees Clockwise.

Take the upper two corners (marked with yellow pins) and fold them along the diagonals(marked with dotted lines).

Push down the top part(marked with yellow pin) towards the center of the paper to form a roof-top type shape.

Rotate the paper 180 Degrees Clockwise and repeat step 14.

Rotate 90 Degrees clockwise.

Take the top 2 points and fold them along the diagonal crease(marked with dotted line) to form a rooftop shape.

Flip the paper upside down so that the rooftop becomes the base.

Fold the top right corner(red pin) along the diagonal crease(dotted line). The red pin should trace over the yellow pin.