Magnet Board for Mother's Day.

So Mother’s Day is coming up and my wife had a good idea. Make my mom a Magnet Board.

Material

1. Found some old cabinet doors to use.
2. Something metal, I used galvanized sheet metal
3. Some trim
4. Paint
5. Glue
6. Clamps will help

I made this at TechShop www.techshop.ws

I prepped the wood by giving it a base coat.

Then I cut the trim pieces to the size I wanted with a compound miter saw.

I also cut the metal into the 2 pieces I needed using the vertical bandsaw. I used the disk sander to take off the rough edges.

I then mocked everything up.

I used liquid nail for gluing the metal down and wood glue for the trim.

I used some deep clamps to lightly hold the pieces.

Before adding some old drawer knobs, it got a fresh coat of paint.


*note I did not add the measurments or paint as they are variables.