Magnet Toggle Switch Fidget

I made this super satisfying magnetic toggle switch just for fun!

I used some 5x5x5 mm neodymium magnets and a 3D printed part.

You can get the magnets here

The STL and Fusion360 files are included in this Instructable

Print the parts with your 3D Printer

Use a brim for better bed adhesion!

Insert the magnets into the holes of both parts

Important: The two magnets on the rail (the longer part) must have the same polarity, but the magnet on the sliding part must have a different polarity, so it attracts the other magnets when inserted.

Now just slide the small part into the rail and have fun!