Magnum Modification
Killerk,s Magnum is a great gun but unless you have a grey cap on the end of the piece that you are trying to fire it will fall inside the gun ,or with a cap it will fall out of the end of the gun ,with this mod you can fire knex pieces with out any mods on the projectile.
These Are the Parts You Will Need .
.
Connecting Holders
connect the black stub to the white rod.
Putting Secondary Holders On
1 magnum with out 1st or 2cnd holders
2 Make this
3 Squeeze it together
4 attach it like so
2 Make this
3 Squeeze it together
4 attach it like so
Making the Piece That Holds Your Projectile
1 get as many small ruberbands as you think will need (you can adjust it later)
2 rap them round the black piece so that you get a flat area for the projectile to hold onto
3 place it here it will not click just sit there
2 rap them round the black piece so that you get a flat area for the projectile to hold onto
3 place it here it will not click just sit there
Connecting 1st Holders
1 connect the white rods to the place shown
2 turn the rods in to hold the black connector
3 here is a movie of how it does not fall out (my editing software is not working so i could not edit it)
2 turn the rods in to hold the black connector
3 here is a movie of how it does not fall out (my editing software is not working so i could not edit it)