Make 7805 Voltage Regulator
by diyelectronic143 in Circuits > Electronics
12 Views, 0 Favorites, 0 Comments
Make 7805 Voltage Regulator
In this project, we are going to create a step-down voltage regulator using a BC547 transistor and a resistor voltage divider circuit. The voltage regulator will be able to lower the voltage from a higher input voltage to a stable, lower output voltage.
Supplies
For making this project what we need is bc547 transistor and resistor that's it this are the 2 Components that we need.
Before Making!
The BC547 transistor will be used in a common emitter configuration, which means that the input voltage will be applied to the base of the transistor, and the output voltage will be taken from the collector. The resistor voltage divider circuit will be connected between the input voltage and the base of the transistor to provide a lower voltage input to the transistor.
Components
By using the some basic components I am going to make 7805 Voltage Regulator we need for making this circuit.
- BC547 Transistor
- 47K Resistor
Before continue this article. Make your next project a reality with JLCPCB! The premier PCB company in China, delivering top-notch 1-8 Layer PCBs starting at only $2 and PCBA at an unbeatable $0 (with free setup and stencil included). Register now using my link and receive a juicy $54 new user coupon code to electrify your creativity! Link : https://jlcpcb.com/IUP
By adjusting the values of the resistors in the voltage divider circuit, we can control the output voltage of the regulator. The output voltage will be stable and regulated, even if the input voltage changes.
Schematic Diagram:
This DIY voltage regulator can be used in a variety of electronic projects where a stable, lower voltage is required, such as powering microcontrollers, sensors, or other low-power devices. It is a simple and cost-effective solution that can be easily built using common electronic components.