Make an IPhone Stylus

Hacksaw blade or hacksaw, hot glue gun scissors, streamline or elite nerf dart, short piece of dowel, tinfoil old earphones (optional, only for connecting to iDevice when not in use).

Cut the nerf dart about 1cm below the tip.

Put a glob of hit glue in the tip part of the nerf dart.

Insert dowel rod into the tip. Wait for the glue to dry before proceeding.

Cut dowel rod to desired length using the hacksaw blade.

Wrap the tip of the dart/rod thingiemewhatsit in tin foil.

Cut the plug end off the earphones, leaving about 1.5" of cord. Onwards from these seps are optional.

Cut about a centimetre of nerf dart off the excess dart you had. Then you cut along one side of this little round so it opens.

Glue the earphone plug into the round.

Fill the rest of the round with glue.

Wrap the glue filled round around the end of the stylus.

Cut a little piece off the rest of the nerf bullet and use it to plug up the space.

Wrap from the end of the stylus up to just past the start of the tinfoil in tape.

When you're using the stylus make sure your fingers are always touching the tinfoil, or it won't work. To protect the screen, put a piece of cellotape on the tip.

Enjoy your stylish from-scratch stylus.