Make It Bridge Observation Deck

by BirdofPreyGames1 in Outside > Water

269 Views, 0 Favorites, 0 Comments

Make It Bridge Observation Deck

Screenshot (10).png

This is my entry to the Make it Bridge challenge. I'm homeschooled and currently in the 7th grade. My entry is a bridge with a glass bottom so that you can take in the nature. The scale is 100:1 (the person in the image is 6ft)

Supplies

tinkercad_logo.png

I used Tinkercad and my laptop.

Building the Walkway

Screenshot (4).png

For this step I took two thin cubes and connected them with a rectangle.

see photo

Building the Walkway (continued)

Screenshot (5).png
Screenshot (8).png

I then duplicated (ctrl + D) the shapes several times.

see photo 1

I grouped them (ctrl + G) and added bars to the sides and middle.

see photo 2

Adding the Rail

Screenshot (9).png

Then I took two cylinders and put a similar pattern as the walkway in between them.

see photo

Adding the Steps

Screenshot (11).png

I took some rectangles and separated them with cylinders, added a rail and connected it to the main bridge.

Tip: Bevel the cylinders for the rail as this adds a nice effect.

see photo

Finishing Touches

Screenshot (10).png

First, I added some support beams, then I added a person for scale, and then a nice landscape for decoration.

see photo