Make a 3D Steve Figure Under $15

Make a Minecraft Steve figure out of just beads and toothpicks!

You will need:

Brown, Blue, Light Blue, White, Gray, Tan, Light Brown, and Teal Perler Beads. I get mine here: http://www.koolstuff4kids.com/

1 square perler bead board (you can use more but it works with just one)

My Template https://www.dropbox.com/s/pv51zni94p25r84/3DSteveP...

4 Toothpicks

and a iron

Use this template and make all of these parts, you can print this and put your board on top of it so its easier. Make sure you make 2 arms and legs.

Put your head together and stick a toothpick in the middle of his neck.

Put the body together and stick one tooth pick in his shoulders then 2 more on the bottom for his legs.

Put both arms together.

Put both legs together.

Connect the body parts together.

Your done! Let me know if you would like me to post more instructables like this, you can also find this on my etsy shop: https://www.etsy.com/listing/219426176/3d-perler-bead-steve?ref=shop_home_active_4