Make a RC Boat From Old RC Car
by iraqi in Circuits > Remote Control
82399 Views, 51 Favorites, 0 Comments
Make a RC Boat From Old RC Car
These is simple and easy steps to convert an old RC car to RC boat.
Materials
1.RC car
2.cork plate
3.plastic container
4.plastic card
5.cutter
6.super glue
2.cork plate
3.plastic container
4.plastic card
5.cutter
6.super glue
Placing Parts on the Cork Plate
see the photos.
The Plastic Container
1:hole for the on/off switch
2:hole for the DC jack
3 and 4 :holes for the shaft
2:hole for the DC jack
3 and 4 :holes for the shaft
Steering the Boat
using the same steering motor for the RC car.
we need to make a fan from the plastic card.
see the photos.
use superglue to connects the pieces.
we need to make a fan from the plastic card.
see the photos.
use superglue to connects the pieces.
Set Up the Motors in the Front and Back
you need to make a rectangular hole in the front for the steering motor.
set up the plastic container (see the second photo).
set up the plastic container (see the second photo).
Finish
charging first....
then enjoy your new boat.. :D
then enjoy your new boat.. :D