Make a Shield From the Patterns on Coins

by NebulaIX in Living > Toys & Games

4959 Views, 23 Favorites, 0 Comments

Make a Shield From the Patterns on Coins

581f621a937ddb229b001496.jpeg

Hi again,

This instructable is kind of like a puzzle, so I hope you enjoy it. This shield that is made up from different coins looks quite cool - I was thinking of gluing it to some stiff card and displaying it inside a picture frame. Though I haven't got quite round to it yet...you might like to do it, so I'll be looking for the I Made It pictures in the comments!

I hope you enjoy it...

Items That You Need

IMG_3555.JPG
IMG_3642.JPG
IMG_3643.JPG
IMG_3644.JPG
IMG_3645.JPG
IMG_3646.JPG
IMG_3647.JPG

Coins: one each of each coin - refer to pictures for help - ensure that one side of each coin is the same as the coins in the pictures - most newer coins will be the same - you might want to use shiny coins if you're planning to put it on display!

1p

2p

5p

10p

20p

50p

£1 optional but recommended


Other:

Picture Frame

Hot Glue or a strong glue

Thick/Stiff card

The Shield

IMG_3648.JPG

If you look carefully at the £1 you'll see it has a shield on it, and the shield is made up of four pieces:

3 Lions

A Standing Lion

A Harp

3 Lions Again

Now, if you look at the coins you have gathered, you'll see that they have pieces of this shield on them.

So what we'll do is piece them together, so they make up the shield on the pound coin.


Assembly

IMG_3652.JPG
IMG_3650.JPG
IMG_3641.JPG

Now, place the 50 p at the bottom, the 5 p above it, the 1 p to its top left and 20 p to its top right.

Now, place the 10 p to the top left of the 5 p and the 2 p to its top right. Make sure all the lines and patterns connect.

What I just wrote probably just sounded like gobbledygook, so it's just better if you looked at the picture.

I put the £1 right at the top, but that's totally up to you. If you're going to hand it up, you can put glitter around it or put more coins, but remember that you made it and you can decorate it however you want.

Thank You

IMG_3550.JPG
warenr bros.jpg

Thank you for reading this Instructable. I sincerely hope you enjoyed it.

If you have any questions, feel free to drop a post below - and as always, comments and feedback are much appreciated.

I'll also be looking forward to pictures of you're coin creation.

"That's all, folks"

Cheerio!

super_me