Make a Card Finger Skateboard!

first i have to say ive broken my right arm so im sorry if sloppy spelling
What you need:
Card
PVA glue
Mold (make your own with some tech decks)
design for top and bottom (i used graffiti for bottom and wood for top)

place your pattern for the top (mines a wood design) on the mold.
smother in glue then place a piece of card the shape of a finger skateboard (out line a tech deck then cut)

repeat this 2 more times so you now have 3 layers of cardboard.

now glue the bottom piece on to the card.

wait 30-45 minutes for the glue to dry whilst it is in the mold.

next sand the sides and edges to make it look smooth.

BOOM! theres your first deck. i would recommend drying for a hour to get a good pop.