Make a Paper Kunai Knife

by chomper96 in Craft > Costumes & Cosplay

69989 Views, 19 Favorites, 0 Comments

Make a Paper Kunai Knife

This is an instructable on how to make a paper kunai knife what you will need is one peice of regular peice of printer paper, some tape,(preferably scotch tape), and some sissors.

STEP 1

FIRST GET A PEICE OF PRINTER PAPER AND FOLD IT IN HALF LIKE A HAMBURGER

STEP 2

NOW CUT IT ALONG THAT CREASE YOU JUST MADE

STEP 3

SAVE ONE PIECE AND FOLD ONE PEICE LIKE A HOT DOG AND THEN OPEN IT BACK UP

STEP 4

NOW FOLD THE CONERS DOWN..........ALL FOUR

STEP 5

NOW THAT YOU DID THAT FOLD THE SIDE OF THE PEICE TO WHERE IT MEETS THE MIDDLE THEN FOLD THE TOP PEICE DOWN TAPE THAT DOWN

STEP 6

FOLD THE SIDES IN TO WHERE IT MEETS AT THE MIDDLE NO TAPE THAT DOWN

NOW THIS IS WHERE THE CUTTING COMES IN. CUT THE PEICE NEAR THE TOP DIAGNOLY ON BOTH SIDES EQUALLY IF YOU CAN

STEP 8

NOW GRAB THE OTHER PEICE AND GET A PENCIL (THE PENCIL IS OPCIANAL)AND ROLL THE PAPER AROUND THE PENCIL THE PENCIL IS JUST TO MAKE IT HARD SO IT WON'T BEND

STEP 9

NOW TAPE THAT AND PUT THE HANDLE IN THE BLADE PART AN TAPE IT

STEP 10

THIS STEP IS OPTIONAL BUT TO MAKE THE RING YOU GET A LITTLE PAPER AND ROLL IT AND THEN SQUISH IT FLAT ROLL THE PAPER AND TAPE IT TO MAKE A CIRCLE

STEP 11

PUT THE CIRCLE THROUGH THE HANDLE AND SQUISH THE TOP PART OF THE HANDLE AND BEND IT AND TAPE IT

STEP 12 YOU ARE DONE

HAVE FUN YOUR FINISHED PRODUCT SHOULD LOOK LIKE THIS

IT IS NOT A WEAPON