Maker Studio HATCHedu ThinkFun_Penguin Zip Line_

In this instructable you will learn how to make a fun zip line adventure for your stuffed animals!

Gather the following supplies

* Maker Studio Gear Set

* Rope

* Tape

* Stuffed Animal

In the Maker Studio Gear Set Box Use the Instruction Booklet to assemble the zip line apparatus.

Using the Cable car instructions on page 16 only build steps 5 and 6 (shown above in the third picture)

Your zip line apparatus should now look like this.

Use the rope to string your zip line.

It is important that one end or your zip line is higher than the other end, so that gravity can do its job, aiding in the zip line experience.

It is also important that the rope be tied tight so there is no slack in the rope between the two ends.

Put the zip line apparatus on the rope, ensure that the rope rides on the small wheel between the two big wheels.

Once the apparatus is on the zip line put the handle through and secure it with the provided black stoppers. This allows your stuffed animal to have something to hang from.

Using the tape gently tape the stuffed animal's paws, wings, hands (whatever they may have) to each side of the zip line apparatus handle.

Take the zip line apparatus to the top of the rope (the high end) and let go, your animal should have the ride of its life down to the bottom!