Making MY Paper Airplane

This Instructable will show you how to make my Airplane which I have nicknamed the "Bullhead"

A piece of notebook paper.

For your first step get your piece of notebook paper preferably un crinkled

You will fold the paper in half in the style shown in the picture

You will unfold the previous and fold it with the way shown and then unfold the fold leaving the paper like it was in step 1

Now that you have your plane in its unfolded mode you will fold the top two corners to make a triangle like stance

Now that you have it in the triangle stance you will now press the creases down hardening the fold to stay the way it is

Now you will pull down the top of the triangle down in the way shown to created the bullhead, and make sure the tip of the bullhead lines up with the triangle crease

Now you will go to the bottom part of the paper and fold the bottom up to the middle of the first hole on the notebook paper

Now that you have your first hole you will fold the fold by folding the whole first fold and making it harden

Now you will take the whole paper and fold it like you would a normal paper airplane and fold together the triangle and the bottom fold may be tricky to fold but it will

Now that your plane is taking shape you will bend one of the outcropping sides and fold it to become a wing like how it is done in the picture

Now you will replicate the last step on the second outcropping and line it up with the last wing

Now you will fold the first edge on the wing to create a sort of cannel and you will replicate it on the other side

Now you should have finished all your steps and should look like the picture above, if it doesn't look like this I suggest you take some looks back or use your own for testing