Making a Proper Swiss Army Knife With Popsicle Sticks (normal Size.) V2.0

what's new in v2.0
there's a ruler in inch scale
there's a saw


This is a step by step easy tutorial and this is made of very cheap materials. Please edit it and upload images. I don't know how to stop it. Please subscribe.

6 small popsicle sticks
a clip
an adhesive
a paper cutter
a ruler
sandpaper
a sitck or toothpick
a drill or board pins
a pencil
a paint
a brush

let's make it!!

cut 6 sticks with 7.4cm or 3.5 inch length. We'll need the remaining in another step.

drill a hole on a stick and place that stick on top of the other and make holes on all the 6 sticks like in picture 3.

first let's begin with the knife. see picture 1 2 and 3
cut off 0.5 cm and then carve the knife

now the ruler. cut 0.6 cm and cut it a little cross as in picture 4
mark inch or cm measures as you like. I'm doing inch. see picture 5.
finally we gonna make the saw.
cut short piece as we did in ruler but more steep.
draw triangles in it and cut it. see picture 6 7.

Insert the stick to one side of the handle and the blade. refer picture,mark the blocking piece like picture 2. take the piece which we have cut in step 2. draw the same in that piece . cut what we have drawn on the remaining piece in step 2. don't cut the handle. even if it's cracked it's alright. because we will stick it in the handle which we have drawn. clip it and allow it to dry.

like the same do it for the ruler like in pics 4 5 6
repeat that for the saw.at final it'll look like picture 7

it's time to assemble follow picture 1 and do that.
at the last blocking piece apply some adhesive and stick it to the handle as seen in picture 2.

paint in any colour.

make the logo as in picture. That's it your swiss army knife replica is ready. Thanks for spending time. please subscribe. and if I get 1000 views on both the tutorials then I will make v3.0. Make sure you check out v1.0. just type this same name without v1.0
Happy making!!!!