Making of Egg Holder Tray Using Cardboard

by i3 creation in Craft > Art

969 Views, 2 Favorites, 0 Comments

Making of Egg Holder Tray Using Cardboard

IMG_20200418_122729.jpg
How to make Egg Holder tray / cardboard DIY / Cardboard reuse ideas

Hi everyone, in this instructables i made a Egg holder tray using cardboard box.

i enjoyed this project very much and it's interesting one.

OK let's start the process.....

Supplies

Cardboard (2 ply)

Fevicol

Cutter

scissors

Scale

Marker

4 Eggs for Demo

Making of Main Tray

Main tray size.jpg
IMG_20200417_122402.jpg
IMG_20200417_123726.jpg
IMG_20200417_123858.jpg
IMG_20200417_123958.jpg
IMG_20200417_124013.jpg

Cardboard size 10 inch (W) x 2.5 inch (H)

Divide this 10 inch into four parts. i.e draw a line at every 2.5 inch distance.

Measure 1 inch from the top side. Draw a line at this point.

Draw a semicircle from the top to the 1 inch line. Cut this semicircle area.

Like this make four semicircle on every 2.5 inch area.

For reference, Use the Pattern diagram

Making the Main Parts

IMG_20200417_124013.jpg
IMG_20200417_124109.jpg
IMG_20200417_124622.jpg
IMG_20200417_125025.jpg
IMG_20200417_125332.jpg
IMG_20200417_125607.jpg
IMG_20200417_130127.jpg
IMG_20200417_130254.jpg

Now we name it as main center part. Make four pieces of center part.

Then, Cut 3 pieces of 10 inch (W) x 1 inch (H) of cardboard.

Take one center part and attach this small piece (10 inch x 1 inch) at the bottom end.

Now attach the another center part on the top of this piece.

Repeat this steps upto all three pieces attached.

Making of Side and Bottom Part

IMG_20200417_160458.jpg
IMG_20200417_161118.jpg
IMG_20200417_161836.jpg
IMG_20200417_163601.jpg

Now make -- two pieces of 10 inch (W) x 1 inch (H) of cardboard (small)

-- two pieces of 10 inch (W) x 3.25 inch (H) cardboard. (Large)

Attach this small pieces into the bottom side of the Large pieces.

Attach this part into the main center part. the small piece should come inside.

Now cut a small piece of cardboard with the size of the bottom side and attach

it using fevicol.

Making of Box Top Cover

Top cover copy.jpg
IMG_20200418_120917.jpg
IMG_20200418_120953.jpg
IMG_20200418_121151.jpg
IMG_20200418_122015.jpg
IMG_20200418_122729.jpg

for making of the top cover use thin cardboard (single ply)

Cardboard size -- 12 inch (W) x 4 inch (H)

Draw line with 1 inch distance from four sides ( Left, right, top and bottom)

Fold this cardboard at this Marked lines.

Cut the edges on left and right as referred in the pattern Diagram.

Fold the cutting area and attach it with the middle part.

Now place the eggs on the tray and close it with the cover.

for measurement and size -- Refer the Pattern Diagram.

For More Details watch the video.

if you like this instructable please vote for me.

if you want to support me click the below link to subscribe my channel

https://www.youtube.com/channel/UCgg6ms0Lf6TArE1GRzRJaLQ