Mandolin Strap
I want to apologize for the poor picture quality.
This is a strap for mandolin, but can easily be made for all instruments
This is a strap for mandolin, but can easily be made for all instruments
Supplies
You will need;
Leather
Rope (I use paracord)
Scissors
And marker
Optional: Lighter or open flame
Leather
Rope (I use paracord)
Scissors
And marker
Optional: Lighter or open flame
Connectors
Cut out 2 squares approximately 2x1in
Cut Holes
Cut 2 slots in the leather (lengthwise not widthwise)
Thread Rope
Thread the rope through one hole and tie it back on its self. The other hole will connect to the mandolin. Do this on ONE SIDE ONLY
Cut the Shoulder Piece
Cut a piece about 2in wide and long enough to easily cover your shoulder
Cut and Thread the Shoulder Strap
Cut to holes, go from underneath so the rope is running along the top and back to the bottom
Find Out Where to Tie the Knot
Thread the rope through the connector and attach it to mandolin. Tighten to where you want it and mark it
Tie a Knot to Hold It in Place
Repeat step 4. After you've done this it is finished, although you can fuse the end of the rope if you so chose.