Belt Buckle Extension Cable, Actually Works !!!

make this sweet belt out of a extension cable and plug, works great easy to use and actually works.

warning!!: I am not responsible for faulty wiring or any injuries, this should be done by a professional electrician.

materials
1 . extension cable
2. wire cutters
3. female plug
4. male plug
5. knife
6. screwdriver

1. cut the one end of your cable and remove the outer insulation
2. remove the paper insulation and the extra wire( i know i used black instead of red)
3. removed the individual wire insulation

1. twist the wires so they won't fray
2. open the plug by unscrewing the screws
3. insert the wires into the ground, positive and neutral ( the plug should have a little diagram or arrows)
4. Tighten all screws firmly
5. close the plug and close firmly the plug with the two screws

1. cut the wire to the approximative length ( might take more than once to get the right length for you )
2. repeat steps 2 but don't forget to put the cap before attaching plug
3. tighten screws with wire inside
4. close the plug and tighten screw ( theres a notch on the cover and a ridge on the plug so the screw holes line up)

this might not fit with all jeans, it just fits thought the belt holes in my jeans.

if its to long cut it a bit shorter and repeat step 3

if its to short ( that would suck ) restart if desired.