Mech Fire and Ice Dragon

by inesh123-best _best in Workshop > 3D Printing

346 Views, 1 Favorites, 0 Comments

Mech Fire and Ice Dragon

Capture  1.PNG

  • It is made using tinkercad.
  • you can make it by following steps and do some changes(like change colour, change its size, add some thing, etc) en something is taken out from other.

Make This Dinosaur

Capture 1.1.PNG

  • Using basic shapes, you have to make this and save it in tinkercad.
  • Duplicate it and use duplicate one.

Make This and Change.

Capture 1.2.PNG
  • Make this and copy.
  • Paste it in duplicate of that dragon.
  • take out missile and lasserbeen part and dellete rest of it.
  • and add it in the dragon like in the first picture.

Make This and Change.

Capture 1.3.PNG

  • Do the same as we did in step 2.
  • And from this, take out 1 bullet and bullet shooter

The Final Step

Capture  1.PNG

  • Attach all the parts together and do some changes in equipment(equipment are those which are taken out in step 1 and 2) as shown in picture.
  • And take any shade of blue and red as it is mech fire and ice dragon.