Metal Working Forge

well I built a forge this is what I got for ya

you need 20 feet of /14 inch angle ,1/8 inch plate one dodge rotor,and one inch 36 inch black pipe one inch 18 inch black pipe and a one one inch steal T-pipe and 4 3/4 bolts and washers.

your gunna need a welder, grinder, drill, tape measure, dc grinder, belt sander, paint pen or soap stone, and 3/4 socket and wrench, hole saw.

cut the plate 2ft by 19 5/8 and cutagle pieces the same lenght and weld it toegther to make a table them cut 3ft legs to make a table.

then grab the dodge rotor and center it then cut a whole then grab left over angle then make a holder

weld the 18 inch pipe to a circular plate then drill hole and bolt it to the roter then drill a whole for the air to come through then weld it all tougher.

it can also be used as a grill