Mild Steel-robo

This robo is designed for the robo war. It's structure is made up of mild steel totally metallic body.....

Ist waight is around 25 kg. It has one wapon called rotation drum..... Here we use momentum..... By making drum waight around 5kg nd giving it high velocity by high torque dc motor, which positively destroy the otger robo during war by transferring momentum during collision ?.

The controls are totally wireless, here we use fsi6 transmitter and fsct6b reciver...

We havw also use apm. 2.8 as a controle bord

Getting all required components as mentioned in pdf...

Check here working and calibrations..

Calibration and programming of apm and Esc.

Creating basic structure of Robot by cutting metal sheet.

Then joining by welding the metal in the required shape

After welding removal of slag and granding.

Soldering the bullet connecter to motor

And xt60 to battery input plug and motors connectors etc.

We have waded a metallic strip at the two adjacent side of circuit cylindrical metallic pipe and hold it with metal Base which have ball baring at the two adjacent ends of cylinder which is fixed on solid metal axis. At one end we have also fixed a metallic gyre which is connected to motor through timing chain...

Motors are fixed to there respective position as shown in pictures one is for drum and other is for motion of robo..... Apm, esc, battry, power module, gps, all the components are fixed to there position as you can see in the picture

Painting is done by removing or covering electronic components. After drying the components or fixed

Checking for any defects is important part...... Like wiring, connection.... Etc

The last step is to check the working of robo.

This is my first instructables post. Please support me as a member.

Fore more check my YouTube channel