Mini Flute for Models

Hello I am ArtLifeYall! My sister is obsessed with miniature stuff so i started making mini items then I made this for her, I recorded my project i made hope you like it.

• tiny but strong stick
• pocket knife (within adult supervision)

first you need to smooth the bark off the stick so start shaving it away very carefully face the pocket knife away from you so you don't cut your self. Now feel the stick if it feels rough any where smooth that part down, once finished go to next part of my page.

You would want to have at least 4-5 holes and a design i used water design with cleared off ends. You can do any design long as the hole still fit on the flute. Now once don't with this go down to my next page on this. :)

So now i had cleared off the blow end by smoothing it down very thin the blow end doesn't have to be thin it can be any thickness but not SHORT. Where the sound (does not make sound this is a model) comes out end needs to be short I made mine short and thick, it can be any thicker than short. Now go down to my next part of this.

This is my final project hope you like it, have a good day.