Mini Spaceship!

This is my attempt at freestyling a cardboard spaceship! Enjoy! Sorry, this is my first instructable, so bear with me please! Also, I made mine in a rush, so it is a bit (not a bit---really) sloppy. You can add thrusters if you really want to.

You will need:

Cardboard

Hot glue

Scissors or anything else to cut cardboard with

An open mind set on the goal!!

Cut out a piece of cardboard no smaller than an altoid tin.

Cut out pieces if cardboard in that same shape and make it a little bigger each time (2-4 pieces like that) then get smaller (1 piece). Make a piece the same size as the biggest piece.

Take all of your pieces and glue them all together (small middle middle big medium small)

Cut out two fins and glue them together. Glue them to the back of the base. Now cut out two more fins and glue them to the sides.

Alright, cut out a rectangular piece of cardboard the length and width of the base. Now take a piece of cardboard the width of the base and glue it to the back of the rectangle. Glue a thin piece of cardboard to the rectangle at an angle. Glue all that to a piece of cardboard. Add supports if needed. Blast off!!!