Minion Night Ligth Powerbank

by cjes in Circuits > LEDs

1654 Views, 3 Favorites, 0 Comments

Minion Night Ligth Powerbank

temp_-641580828.jpg
20170205_154940.jpg
miio.jpg
20170205_150138.jpg
20170205_150801.jpg

Reuse soap container for hands

Before starting we will use welding so I suggest you see the welding course and you should be very careful when handling lithium batteries.

To be able to convert the container of minions into a lamp we will need:

1. Powerbank cheap

2. LED Battery-powered Night Light Stick on Cabinet Closet Touch Lamp Lights0

3.Minion liquid Hand Soap Dispenser

Tools Need

Danger_Hot_JY37_ANSI.jpg
Tinning_flux.jpg
s-l300.jpg
0004169_tool_wire_cutter_stripper_470.jpeg
68155.jpg
Scissor-Free-PNG-Image.png
scratch-resistant-safety-glasses-eye-protection-black-with-clear-lens-1-pair.jpg
New-Soldering-Iron-220V-21W-Electric-Pencil-Welding-Solder-Heat-Tool-F0250-High-Quality.jpg
f9f5f7b5-bb07-450c-88ca-ab0a3d953a2e_1000.jpg
403988899_679.jpg
hot glue.jpg
8897e134-abb3-4862-8c91-f5cbb2193b6b.jpg

Step 1: Tools Needed

Precaution: Can suffer injuries if not taken care of so I do not take responsibility for any injury if any tool does not know how to use it is better to seek help.

Tools:

  • Safety glass
  • Scissors
  • Cutter
  • knife
  • Hot glue
  • Hot glue sticks
  • Soldering
  • IronSolder an flux
  • Wired cutter
  • Hairdryer
  • Dust mask

Technics:

Soldering

Disarm the Power Bank and the Light

20170205_150315.jpg
20170205_150413.jpg
20170205_150428.jpg
20170205_150431.jpg
20170205_150801.jpg
20170205_151319.jpg
20170205_151322.jpg
20170205_151419.jpg

Firts step.

In the powerbank I got a decal where the usb removed this decal and I found that I had 4 screws after removing them I just had to pull the white part and the battery went out with the electronics.

Second step.

The lamp was simpler since I only had to pull the pieces to disassemble and separate each of the parts leaving only what I would use the electronics without the base.

To Assemble

lamp.jpg
temp_310199183.jpg
temp_-625308456.jpg
temp_-1162137749.jpg
temp_-75101084.jpg
temp_-2117071972.jpg

Connect as shown in circuit

Use the same plug to place the tablet with the white usb base