Mixer Mover

by MikeTheMaker in Workshop > 3D Printing

1240 Views, 11 Favorites, 0 Comments

Mixer Mover

mixmove9a.jpg

This "Wheelbarrow for your mixer" lets you easily move a heavy stand mixer into the corner or under cabinets. Lift the front handle and pull or push the mixer to its desired location.

Print the front, connector, rear and two wheels. Print at 100% fill to maximize strength. The design files (using 123d) are included in this step if you choose to modify anything.

mixmove1.jpg
mixmove2.jpg

Friction fit the two bearings into two wheels.

mixmove3.jpg
mixmove4.jpg

Push the wheels onto the rear axle.

mixmove5.jpg
mixmove6.jpg

Use the connector piece to join the front and rear (friction fit).

mixmove7a.jpg
mixmove8.jpg

Set the mixer on the "mover" and you're ready to roll.