Molding a Handle - DIY Foam Weaponry

by Sadi789 in Craft > Costumes & Cosplay

3390 Views, 28 Favorites, 0 Comments

Molding a Handle - DIY Foam Weaponry

main pic.png
This Instructable is part of a collection of I'bles on how to make foam weapons. Check it out here!

Round Grip

P1160241.JPG
P1160243.JPG
P1160261.JPG
You can give this kind of handle a bit more shape by molding it with pieces of foam. Divide it into sections with a thin strip around the middle, or change the shape with strips going up the sides.

Materials
  • 1/4" Craft foam
  • Superglue [or other glue]

Square Grip

P1160333.JPG
P1160335.JPG
P1160336.JPG
P1160339.JPG
P1160340.JPG
P1160341.JPG
P1160343.JPG
P1160345.JPG
P1160346.JPG
P1160349.JPG
P1160350.JPG
P1160351.JPG
P1160352.JPG
P1160353.JPG
P1160354.JPG
P1160355.JPG
P1160357.JPG
P1160367.JPG
P1160368.JPG
P1160370.JPG
P1160371.JPG
P1160372.JPG
Materials
  • 1/4" craft foam
  • Superglue
  • Double sided tape
  • Pencil (non mechanical, w/ eraser)
Tools
  • Knife
  • Cutting surface
  • Pliers