Monitor Stand With Build in USB and Audio/Mic Input and Card Reader

Before i start with my first project I will apologize for my bad English. The reason is that I'm from The Netherlands.

Any way this is the result from my project.

For this project i used:

Materials:
    *Wood
    *Screws

Tools:
    *Ruler
    *T-Square
    *Measuring tape
    *Pencil
    *Jigsaw
    *Drill
    *A bit for the Screws

The first thing you need to do is make a plan of the project and take the measuring of all the components and the space where the monitor stand will come.

You will need a wooden plank and draw the measurement of the stand on the wood with a pencil. Now we will saw the wood to the right length and drill holes for the cables.

You will now put everything together and make sure you don't forget to attach the cables on to the cards