Moon Phases Wall Art

Hello, in this instructable, I will show you how I made the moon phases wall art. I took astronomy a few semesters ago, and there is so much that goes on in outer space that I just find so interesting. This craft does not take very long to make, so follow along with me :)

The supplies you will need: (sorry the picture is upside down)

Cardboard (I recycled a pizza box)

Exacto knife

Compass

Protractor/ruler

A writing utencil

Yarn (in the picture i have shown a spool of string that I later decided not to use)

Paint (the picture shows black but you need white too)

Paint brush

tape (not s

Optional:

Scissors (not shown)

100 grit sand paper (also not shown

First, I traced 4 circles with my compass on to the cardboard. I set my compass to be a 1 1/2 inch radius.

Next, I cut the four circles out with an exacto knife. I cleasned up the edges with some scissors.

After cutting out the circles, I used my marker to mark where I was going to cut the phases. Then i cut them out with the exacto knife. I used scissors to clean up the edges, and i used 100 grit sand paper along the edges to give it a smoother look.

There are two painting steps, the first step is just paint all of them white and let it completely dry

After the first coat is fully dry, mix a small amount of black with a lot of white to make a feint light grey, and paint streaks of grey on the phases.

Finally, cut a piece of yarn, I did not measure it, i just used my best judgement, and then tape the phases anout two inches apart to the string. Your wall art is finished :)