Mouse Trap Tractor

To begin making your mouse trap car, you will need these tools, and materials.

6 CDs
Long string
Mouse trap
Hot glue gun
3 Bamboo sticks
2 long pieces of small wood
1 long thick piece of wood
Drill
And regular glue(not in the picture)
Medicine Caps

Take the two skinny sticks and glue them underneath the big board. It isn't optional, but we used c clamps to keep the board glued so it wouldn't fall apart.

Drill the two ends on each side

Take your 2 caps and glue them on each side of the CD

Take a drill and drill a little hole in the center of the caps

Put the stick in the hole

Put glue on the top of the bored where u would want the mouse trap to go

Put your mouse trap on the glue, and use 2 c claps. ( optional )

Take your hot glue gun and glue the end so the CD will not fall off.

Take a long thin stick

Take some string and wrap it around the end of the stick 4 times and glue it with a hot glue gun.

Take the other end of the string and wrap it around the axle.

Glue the end of the long stick to the mouse trap

Now your mouse trap is ready:)