Movie Design Mouthmech

This Instructible is for helping you assemble your FNAF Movie Eyemech Replica's.

1. 3D Models
2. 1 Servo (QY3240MG)
3. M3 Screws (M3 Set)
4. M5 Screw and Nut (M5 Set)
5. 1 Servo Horns (25T Servo Horns)
6. 2 Ball Joints (M3 Ball Joints)
7. Threaded Rod (M3 Rod)

This Video Shows u every Step of assembling my Mouthmech

For Stability I recommend Mirroring this Mech on the other Side

There are multiple ways u can control your Mouthmech, the Method I personally Chose is RC Equipment because its a easy to understand and fast Method to get Optimal Results. This is also what the FNAF Movie did for their Animatronics

The Movies Tech:

1. Receiver: Archer R10 Pro
2. Controller: FrSky Taranis X-Lite Pro

These are also the exact components I use in My Suits

Another Method would be to use the Free Live Servo animating Program Bottango, It simply allows you to hook up your Arduino to the PC and Move the Servos with their Software. This is Live so u can instantly see how it turns out.

If your more familiar with Programming then that is ofc also a good solution to getting it Move.

Keep in mind if u have more then 3 Servos u will definitely need a Servoshield like the PCA9685