Rubberband Crossbow!

by Iridium7 in Living > Office Supply Hacks

3840 Views, 3 Favorites, 0 Comments

Rubberband Crossbow!

Picture 015.jpg
Picture 016.jpg
Do you remember those little pieces of paper you would fling around? If not then it must be a newer thing. : / I basically built a crossbow version! Enjoy!

Materials

Picture 001.jpg
Materials:
2 metal flat washers
3 Screws
I block of wood
2 rubber bands

Tools:
Screwdrivers
Square
Hammer
Punch

Making the Rubber Band

Picture 002.jpg
Picture 003.jpg
It is simple you take two rubber bands and interweave them.
Pretty simple!!!!!

Actual "cross Bow"

Picture 004.jpg
Picture 005.jpg
Picture 006.jpg
Picture 007.jpg
Take your piece of wood and make to marks on the front of it.
Then take your Punch and make the holes for the screws.
then layer the rubber band under the washer and screw on tightly
Repeat 2x

Attaching the Clamp

Picture 010.jpg
Picture 011.jpg
Alright now all you have to do is attach the clamp and your done just make sure that you have a screw that is bigger than the loop.( see pic if that doesn't make any sense)

Duck!

Have fun