NEW LIVING ROOM PALLET TABLE FOR LETTING HOUSE

by D0itYourself in Workshop > Pallets

19058 Views, 233 Favorites, 0 Comments

NEW LIVING ROOM PALLET TABLE FOR LETTING HOUSE

image_1367085777605098.jpg
IMG_1091.JPG
image_1367085757060266.jpg
P1090088.JPG
Hello all,

Well as the title says I had to build a better looking table for my letting house living room. The house it's just 20m by the sea and the idea was to build a table which when you see it to give you a sense/remembrance of the sea.

Materials Used

The materials used are as follows:


  • Wooden Pallets (found around)
  • Makita multi-tool
  • Sand Paper
  • Primer
  • Paint
  • Screws/Nails
  • Plastic Feet
  • Silicon Base
  • Glass (Ordered)
  • Sea rocks
  • Star fish (SCUBA diving)
  • anchor, scuba helmet, wooden barrel and an amphore (>$10 on EBAY) (Not on the picture, will follow one with them)

Sanding the Pallets

This was the second wooden pallet table I did. When I finished the first one I said that it would have been better to disassemble the pallets so it will be easier while
  • sanding,
  • painting &
  • cutting the pallets to make them the same size.

Disassemble the Two Bottom Pallets

IMG_0844.JPG
IMG_1009.JPG
IMG_0932.JPG
IMG_0933.JPG
IMG_0928.JPG
IMG_0969.JPG
IMG_0929.JPG
IMG_0929.JPG
IMG_0970.JPG
IMG_0971.JPG
IMG_0972.JPG
IMG_0977.JPG
IMG_0974.JPG
IMG_0980.JPG
IMG_0976.JPG
IMG_0975.JPG
IMG_0978.JPG
IMG_0981.JPG
IMG_0982.JPG
IMG_1079.JPG
I disassemble the two bottom pallets and I cut them to be 100cm X 60cm.
Then I sand them and apply woodworm. After that, primer and sanding again. Then I paint them white.

After a day when the paint dried, I've start assembling them.

Design the Pallet With the Drawer

IMG_1077.JPG
IMG_0843.JPG
IMG_0988.JPG
IMG_0989.JPG
IMG_0990.JPG
IMG_0991.JPG
IMG_0992.JPG
IMG_0930.JPG
IMG_0931.JPG
IMG_1035.JPG
IMG_0968.JPG
IMG_1010.JPG
IMG_1014.JPG
IMG_1011.JPG
IMG_1012.JPG
IMG_1013.JPG
IMG_1042.JPG
IMG_1037.JPG
IMG_1036.JPG
IMG_1038.JPG
IMG_1039.JPG
IMG_1041.JPG
IMG_1040.JPG
IMG_0979.JPG
IMG_1089.JPG
IMG_1092.JPG
IMG_1088.JPG
So, the idea for this table was to make a "drawer" on the top and fill it with sea rocks, star fish anchor and other things so it refers to sea.
We have decided that the drawer will be at one side of the pallet and not in the middle.
I disassemble the pallet, cut it in the right dimensions and start designing the drawer.

Decorated

image_1367085777605125.jpg
image_1367085777605098.jpg
image_1367085757060325.jpg
image_1367085757060308.jpg
image_1367085757060284.jpg
image_1367085757060266.jpg
image_1367085757060203.jpg
image_1367085757060246.jpg
Just to make things clear guys. I'm doing any decoration!! :D
My fiance did it :)