Nerf Jolt EX-3 Mod (Holds 2 Extra Darts!)
by tinyhooman in Outside > Launchers
655 Views, 2 Favorites, 0 Comments
Nerf Jolt EX-3 Mod (Holds 2 Extra Darts!)
Needed stuff:
Pliers(needlenose)
3 Rubberbands
Screwdriver
Nerf jolt
Glue/epoxy(i chose glue because I wanted it to be removable)
Patience(for ar being taken out and for glue drying)
Pliers(needlenose)
3 Rubberbands
Screwdriver
Nerf jolt
Glue/epoxy(i chose glue because I wanted it to be removable)
Patience(for ar being taken out and for glue drying)
Unscrew/ AR Removal
Unscrew the bottom 4 screws(pic 1)
Take out the plunger rod and then stick your pliers in there to try to get out the AR(pic 2/3)
Search nerf jolt AR removal if you want better instructions
Take out the plunger rod and then stick your pliers in there to try to get out the AR(pic 2/3)
Search nerf jolt AR removal if you want better instructions
Dart Holder
Take a kforce dart holder and glue/epoxy all over bottom of it. Then stick it on jolt, Then, 1-2 hours later, step Done.
Reassembly
Put the plunger rod and 4 screws back into the jolt.
Rubber Band Mod
Search nerf jolt rubber and mod for instructions on this, but for now:
To do the rubber band mod, you need as many rubber bands as you want, and... obviously a jolt. Wrap a rubber band from the bottom orange piece sticking out to the top.
To do the rubber band mod, you need as many rubber bands as you want, and... obviously a jolt. Wrap a rubber band from the bottom orange piece sticking out to the top.
Done!
GG u got tagged by a jolt m8
Is what you will be saying when you take this to a war
Anyway, Congrats and doing My jolt mod!
Is what you will be saying when you take this to a war
Anyway, Congrats and doing My jolt mod!