Nerf Maverick No-damage Full Barrel Removal Mod

by maxmaz2 in Outside > Launchers

20972 Views, 10 Favorites, 0 Comments

Nerf Maverick No-damage Full Barrel Removal Mod

DSC01033.JPG
DSC01034.JPG
makes the barrel come out all the way so if you have two you can switch 'em out no damage totally reversible (if you don't break anything)

P.S. the reason my slide is not on is because its broken

Unscrew

DSC00925 copy.JPG
DSC01039.JPG
take all the screws out of the slide first then pull it apart then take the screws out of everything else then pull it apart when you pull everything apart push the yellow button on the other side and take the barrel out

The Barrel

DSC00931 copy.JPG
DSC00930 copy.JPG
DSC01040.JPG
DSC01041.JPG
DSC01044.JPG
DSC01046.JPG
DSC01048.JPG
DSC01049.JPG
DSC01036.JPG
DSC01035.JPG
pull the gray pieces in opposite directions to pull an orange piece off the metal rod. pull the gray piece off the front. then unscrew the back of the barrel and pull off. flip it over and unscrew the 2 screws holding the gray and orange pieces on. once this is done pull the gray piece off but keep the orange piece. now screw on the orange piece only and then screw the back on again. push the metal rod through the front and then put the spring on. now push the orange ring on again.