Nerf Longshot Clip Mod: Drum Magazine
by Ratchet_M60 in Outside > Launchers
28942 Views, 9 Favorites, 0 Comments
Nerf Longshot Clip Mod: Drum Magazine
this is my nerf longshot and i had an idea that was 5 star. i cant belive anyone else hadnt of thought of this. A drum magazine is a clip ussually for a heavy machine gun, it carrys a high amount of bullets in the cylinder shaped mag.
WARNING: THIS MOD DOES NOT AFFECT AMOUNT OF NERF DARTS THAT FIT IN THE MAGAZINE
ITS JUST FOR SHOW.
WARNING: THIS MOD DOES NOT AFFECT AMOUNT OF NERF DARTS THAT FIT IN THE MAGAZINE
ITS JUST FOR SHOW.
Materials
1. 1 roll of duct tape (any color)
2. 2 CD-ROMs you dont care about
3. NERF Longshot CS-6 sniper rifle
4. NERF Longshot magazine
5.10 in of PVC Pipe (preffered 1/2 in in diameter)
6. hacksaw or PVC cutter
7.OPTIONAL spray paint (color you want the mag to be)
8.Hot glue gun
9.20 minutes of time
Cut Piping Reinforcement
cut your 10 in pvc to 3, 2.7 in long pieces with the hacksaw or PVC cutter.
Glue Disks on Mag
use the hot glue gun to secure the disks on the sides of the Mag.
ATTENTION: FIND THE MARK WHERE THE CLIP STOPS ENTERING THE GUN AND GLUE THE EDGE OF
THE DISK THERE.
ATTENTION: FIND THE MARK WHERE THE CLIP STOPS ENTERING THE GUN AND GLUE THE EDGE OF
THE DISK THERE.
Reinforcements (PVC)
glue the pieces of pvc between the disks to make it more solid
you are almost done.
you are almost done.
Wrap in Duct Tape
wrap the disks in duct tape (5-12 layers is recommended otherwise it is really flimsy
try to be neat.
try to be neat.
Fit the Mag Into the Longshot.
see if it fits
it should work like this