Nice Freaky Goggles for Halloween and Nice Party's

On the cheap,
1$ for the goggles(made in china),
an old nylon bag,
an swimming goggles head band,
Lots of cutting and drilling tools(Dremel, scissors, cutter, sandpaper, etc...),
some screws,
Glue
Patience for 4 to 6 hours.

Get those chineese soldering goggles for a dolar

Disassemble them

All of the parts

Now it's time to grab your dremel and start cutting all apart.

You should end up like that

Drill some attach points for the straps
Ok here is an option, up to you, but it looks kind of funny too, i drilled holes on the mount to place some screws(in my case 4), to swivel the fore mount.
It's a good moment to clean those cuts and prepare the frame to cover it with some nylon textile.

Glue the frames to the nylon, let them dry, and then cut the excess, so your face won´t be hurt using them

place the straps and figure out the right measure for your head on the nose strap, then glue it

Glue time, start to wrap every bit of the frames with nylon textile, it's a kind of tricky, but it's what it gives the "Pro" touch

Still have to clean some of the cut's, i used a lighter to smooth everything out, also drilled the lenses with tiny holes, i it's a good moment to draw a nice pattern for the holes on the lenses, mine were to fast to think about that!

Nylon covering complete!

And this is what you should get after all the work done!!! Nice halloween, Trance party's etc....